stuck at swirl
screen (past "Please wait..."):
Network problems can also cause the boot process to hang on a ReplayTV. If your ReplayTV boots past the "Please wait ..." and "One moment please ..." screens, and then hangs at the next screen (referred to as the swirl screen), you may have a network problem. In this case, the system may continue to reboot if left alone after 15-20 minutes or more. You can also see if a network problem is the source of the boot up process hanging by removing the network cable from the back of the ReplayTV and rebooting it. If the ReplayTV then boots normally with the network cable removed, you have a network configuration problem of some kind. Double check your ReplayTV network settings and your router for ReplayTV access to the Internet.
Here's the swirl screen:
Previous | Home | Next