ReplayTV 4000/4500 Hard Disk Replacement

Warning - Unplug power cord before replacing hard drive.

 

 

Remove 9 cover hold down screws then lift off cover.

 

Remove power and IDE connector from drive. Wiggling and pulling connector at the same time aid removal.

 

Remove 4 hard drive mount screws

 

Lift hard drive to the left and out of recorder.

 

Remove 4 drive to mount screws

 

Separate drive from mount.

 

To install drive, reverse procedure.

**WARNING** Pay very close attention to the power connector shape

This connector is meant to fit one way. Inserting it upside down will burn out the hard drive when AC power is plugged in.

 

Upon bootup run setup and enjoy your upgraded ReplayTV!

Home