ReplayTV 2020, 3000 and Showstopper Cooling Fan Mod Instructions

 

No cutting or drilling. Fan mounts using existing drive cover screws.

 

Unplug AC power from recorder before working on it.

Remove 3 screws from back and 4 screws from bottom of recorder cover. Slide cover off rearward. Touch hand to bare metal on recorder case to discharge static electricity.

 

Cooling fan may be installed any of the three ways pictured below. For maximum drive cooling leave drive cover off then secure drive with plastic tie.

 

Fan without drive cover

 

 

Fan with drive cover

 

 

Fan with dual drives

 

 

 

Fan is shipped set for maximum cooling. You may elect minimal (silent) cooling by rearranging pins as seen below

 

 

Reinstall recorder cover. Fan mod is complete

Home