ReplayTV 2000/3000/Showstopper Power Supply Replacement

Warning - Unplug power cord before working on recorder

 

Remove 7 cover hold down screws from underside and rear of cover

 

Remove 5 hard drive cover screws, lift cover off drive and set aside

 

Pull off two power connectors

 

Remove 4 mount screws and lift out power supply

 

To install power supply, reverse steps

 

6 wire connector must be installed as seen. Reversing this connector may cause irreversible damage to motherboard or power supply

Once recorder is fully assembled, plug AC power cord in and enjoy the wonderful world of ReplayTV!

Home